Free shipping* Performance Guaranteed online support
CALL US 201.935.2910
Forced Performance Red HTZ for Subaru WRX/STi

Forced Performance Red HTZ for Subaru WRX/STi

Forced Performance Blue HTZ for Subaru WRX/STi (EJ)

Forced Performance Blue HTZ for Subaru WRX/STi (EJ)

Forced Performance Green HTZ for Subaru WRX/STi (EJ)

FP Green HTZ Subaru WRX STi
$1,225.00
In stock
SKU
EJ-Green-HTZ

Oil Supply Line and gasket set included!

Subaru Green HTZ

  • Compressor wheel - 76HTZ
  • Flow rating - 61LB per minute
  • CW Measurements - 54.8MM Inducer / 76MM Exducer
  • TW Measurements - 67.3MM Inducer / 58.8MM Exducer
  • Compressor Housing - 60MM Small Inlet or 84MM FAP Cover
  • Turbine Housing - FP 8CM Subaru Turbine Housing
  • CHRA - FP Journal Bearing
  • Oil Line - Included

The FP Green™ turbocharger for the Subaru WRX/STi features the 76 HTZ™ compressor section with your choice of 60MM small inlet or the 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2 turbine housing. The FP Green™ flows 61LB a minute and is capable of producing upwards of 500WHP.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Subaru Oil Feed Line Installation Instructions

Porting is available for this turbocharger. Please take a look at our Porting Services page for examples.

84MM FAP Cover Requires TGV Delete to fit in stock location

Write Your Own Review
You're reviewing:Forced Performance Green HTZ for Subaru WRX/STi (EJ)